Pro Taper Contour Handlebars - 1-1/8 Inch

The Pro Taper Contour 1-1/8" Handlebars feature knurled clutch side to secure grip and include 1/4" cut guides to accurately reduce bar width and a high-density molded pad. These handle bars fit most dirt bikes and ATVs with 7/8" diameter control ends and 1-1/8" clamp ends.

FEATURES

• Scratch and peel-proof "un-sticker? graphics


• Most bar models come 800mm wide with a full 200mm each side for controls


• knurled clutch side for secure grip hold


• 1/4?? cut guides to accurately reduce bar width


• Includes new high-density molded pad ? a $16.99 value!

FITMENT NOTES

It is very important when fitting the handlebar that any sharp edges are removed from the triple top clamps where they come into contact with the handlebars (see illustration) Failure to remove these sharp edges could lead to damage to the outer tube, which may result in a fatigue failure.

It is also important when the handlebar is fitted and the handlebar fitting bolts are fully tightened, that there is a gap showing between the clamps at both the front and rear (see illustration). If there is no gap showing, then remove some metal from the clamp with a coarse file.

To make sure that the handlebar is aligned centrally use the laser marked positioning grid for centre and rotational location (see illustration). The positioning grid also allows you to replace the handlebars in exactly the same position should you need to remove the handlebar from the bike for any reason.

IMPORTANT WARNINGS

In the event of a severe crash the handlebar must be replaced. This is because in a crash the handlebar is the most stressed component on the motorcycle.

• Do not modify the handlebars.


• Do not modify 7/8 inch mounting clamps to fit the handlebar. It is essential that 1 1/8 inch mounting clamps are used.


• Do not centre punch or in any way mark the handlebar. Physical marking of the handlebar can lead to stress raisers.


• Do not clean the handlebar with any form of metal polish or concentrated cleaning fluids. The use of these products could damage the anodised finish of the handlebars.
  
  

MAINTENANCE

In the event of any crash, it is a wise precaution to make sure that the handlebars have not been damaged. Check also that none of the controls have come loose and that the handlebar has not moved in the triple top clamps.

?

HANDLEBAR BEND DIMENSIONS

?

DIRT BIKE RIDER HANDLEBAR BENDS

DOUGH HENRY / CHAD REED

• WIDTH - 800 mm


• HEIGHT - 92 mm


• SWEEP / PULLBACK - 57

RICKY CARMICHAEL

• WIDTH - 800 mm


• HEIGHT - 77 mm


• SWEEP / PULLBACK - 55 mm

TRAVIS PASTRANA MX / RM LOW BEND

• WIDTH - 800 mm


• HEIGHT - 74 mm


• SWEEP / PULLBACK - 55 mm

TRAVIS PASTRANA FREESTYLE MX

• WIDTH - 775 mm


• HEIGHT - 121 mm


• SWEEP / PULLBACK - 55 mm

FACTORY SUZUKI / KTM STOCK

• WIDTH - 800 mm


• HEIGHT - 92 mm


• SWEEP / PULLBACK - 47 mm

KEVIN WINDHAM MX / SUZUKI RM MID

• WIDTH - 800 mm


• HEIGHT - 99 mm


• SWEEP / PULLBACK - 54 mm

NATHAN WOODS LOW

• WIDTH - 775 mm


• HEIGHT - 71 mm


• SWEEP / PULLBACK - 60 mm

NATHAN WOODS HIGH

• WIDTH - 775 mm


• HEIGHT - 95 mm


• SWEEP / PULLBACK - 62 mm
  
  ?

ATV / DIRT BIKE & OTHER HANDLEBAR BENDS

HONDA CR MID

• WIDTH - 800 mm


• HEIGHT - 82 mm


• SWEEP / PULLBACK - 57 mm

HONDA CR HIGH

• WIDTH - 800 mm


• HEIGHT - 95 mm


• SWEEP / PULLBACK - 60 mm

UNIVERSAL LOW

• WIDTH - 800 mm


• HEIGHT - 71 mm


• SWEEP / PULLBACK - 55 mm

KAWASAKI KX HIGH

• WIDTH - 800 mm


• HEIGHT - 108 mm


• SWEEP / PULLBACK - 56 mm

YAMAHA YZ / YZF HIGH

• WIDTH - 800 mm


• HEIGHT - 84 mm


• SWEEP / PULLBACK - 52 mm
  
  ?

MINI / PIT BIKE HANDLEBAR BENDS

MINI LOW

• WIDTH - 775 mm


• HEIGHT - 71 mm


• SWEEP / PULLBACK - 47 mm

MINI HIGH

• WIDTH - 775 mm


• HEIGHT - 95 mm


• SWEEP / PULLBACK - 52 mm
  
  ?

QUAD / ATV HANDLEBAR BENDS

ATV LOW

• WIDTH - 800 mm


• HEIGHT - 95 mm


• SWEEP / PULLBACK - 60 mm

ATV MID

• WIDTH - 800 mm


• HEIGHT - 108 mm


• SWEEP / PULLBACK - 56 mm

ATV HIGH

• WIDTH - 800 mm


• HEIGHT - 121 mm


• SWEEP / PULLBACK - 55 mm

ATV YAMAHA RAPTOR

• WIDTH - 770 mm


• HEIGHT - 143.2 mm


• SWEEP / PULLBACK - 86.5 mm